Classic Stripe

Pile Material:
– 100% Polyamid

Backing:
– Vinyl

Pile Weight:
– ± 825 gram/m2

Total Weight:
– ± 3525 gram/m2

Pile Height:
– ± 6mm

Total Height:
– ± 8mm

Pile Structure:
– Needle Punch Plush

Surface Aspect:
– Smooth with Self-stripe

Water Absorption:
– 5.3 ltr/m2

Please note that fire testing and slip testing results are not available on these products, please consider if you need these before purchasing.

Product Code
– CS200ANT

Mat Sizes
– All Birrus Classic Stripe Matting Systems are custom-made to your specification from a manufactured roll with a width of 2050mm (including edging) and a length of ± 20m

Surface Mounted:
– Edged for loose-laying with grippers to reduce movement of the mat under-foot.

Recessed Install
– Supplied with a matting frame in Aluminium/Brass or Stainless-steel.
– Loose, mitred and drilled for screw-fixing.

Birrus Installation Service Available (contact us for more details)

For Recess Applications:
– Ensure recess is clean, level and smooth (for gluing in mat the recess will need an engineered screed or skim coat to ensure adhesion).
– Install angles using glue or mechanical fixings.
– Glue in the mat using a contact adhesive or pressure sensitive glue.
– It is advised that the mat be unrolled and allowed to adjust to climate for 8-24 hours.

For Surface Mounted Applications:
– Unroll the mat and roll the edges down, these will relax over time and lay flat.
– Ensure the substrate is clean from dirt and debris.

– 2 Year Limited Warranty (Contact us for warranty details)